5 Plumbing Upgrades To Consider During Your Home Renovation

Are you looking to renovate your house and give it a much-needed facelift? Then, it would be best to consider upgrading your plumbing as well.

Believe us - plumbing upgrades can make your life a whole lot easier. This is especially true for those who haven’t upgraded their household plumbing. In such scenarios, homeowners might be plagued by leaky taps, blocked pipes or corroded valves.

All of these issues can be resolved if you upgrade your plumbing. Besides, installing upgraded components will modernise your home and make it feel more convenient than before.

But now the question automatically arises - what plumbing upgrades should you consider while renovating your home? After all, upgrading all the plumbing components at once will be ridiculously expensive and unnecessary.

Five Plumbing Upgrades That You Can Get While Renovating Your Home

1. Replace The Old Pipes

Naturally, if you are renovating the plumbing system, you will also need to upgrade the existing pipes. After all, these components carry water throughout the system so that you have a steady flow of water everywhere in your home.

Typically, the old plumbing pipes may become worn out due to usage. However, it is common for them to become clogged, corroded or damaged. The pipes get clogged when mineral deposits or grease build up inside the inner lining. In many cases, it might give rise to leaky pipes as well.

On the other hand, if your water supply has a high pressure or contains corrosive materials, your pipes may become damaged or corroded with time. Whatever the case, you must replace the old pipes with new, durable ones to eliminate these issues.

2. Install A Tankless Water Heater

Most modern households have some form of water heater system installed for convenience. These heaters regulate the water temperature so that you can use the water comfortably for your daily activities. It offers a constant supply of warm water on demand, which can be extremely helpful for those living in colder regions.

Therefore, if your household plumbing system does not have such an appliance installed, you should get it immediately. And if you do have a traditional water heater, you should replace it with a modern, tankless variant.

This is because tankless heaters are much more energy-efficient than conventional water heaters. Thus, you can save much money on your monthly electricity bills. Besides, they are much more compact by design, making them easier to install.

3. Update All Of Your Plumbing Fixtures

This is the most effective method of upgrading your existing plumbing system. Not only is it easy to implement, but it is also relatively cost-effective.

All you need to do here is replace your existing water fixtures with new ones. For instance, you can update your kitchen’s water taps, sinks, and basins to improve functionality. Similarly, you can swap out your bathroom’s old shower heads, faucets and other components with new ones.

In any case, upgrading these fixtures will help enhance your house’s value. They will also help optimise your water consumption since modern water fixtures are designed to be more efficient.

4. Install An Efficient Water Filtration System

A water filtration system is another essential appliance you must install in your plumbing system. The water that is usually supplied to your home contains several impurities. These impurities can either be in the form of dissolved minerals or suspended contaminants. The former increases the hardness of the water, while the latter makes it unsafe for human consumption.

Thankfully, a filtration system can soften your water, preventing the scale build-up commonly observed in hard water. Likewise, it will remove all the harmful contaminants, so you don’t have to worry about falling ill after drinking the water.

If you already have a water filter installed, you can replace it with a newer model. Doing that will give you many more features and functionalities to improve usage efficiency.

5. Install A Sump Pump

For those who do not know what a sump pump is, it is an appliance used to pump out the water collected in a sump basin. A sump basin is a type of drainage basin that contains excess water from buildings. It is a common feature in houses in areas with heavy rains and frequent flooding.

Without a sump basin and an accompanying sump pump, the excess water will make the walls and floors of your home feel wet. That, in turn, will accelerate mould and mildew growth, posing a significant health risk to your family.

So, to avoid such problems, you should install a sump pump. If you have an old sump pump, you should replace it with a newer and more efficient model. That will keep your home clean and dry and minimise energy consumption. Also, remember to maintain your sump pump regularly.

Upgrade Your Home’s Plumbing With These 5 Renovation Ideas

That brings us to the end of this brief discussion about plumbing upgrades. Of course, you can consider other upgrades, such as installing a rainwater harvesting tank, getting outdoor taps, or even constructing an extra toilet. However, those are relatively more expensive than the ones mentioned here.

If you have sufficient DIY experience, you can perform most of the upgrades mentioned here. But if that’s not the case, you might want to seek professional help.

This is where we come into the picture. Here at WP Plumbing, we have a team of certified plumbers in Melbourne to handle all your plumbing needs. So, contact us if you plan to renovate your plumbing alongside your home!

Frequently Asked Questions

1. Are There Any Eco-Friendly Plumbing Options Available For Home Renovation?

Yes, there are several eco-friendly options that you can use for your home renovation. For instance, using tankless heaters can minimise your energy consumption significantly, as we have mentioned before. Aside from that, you can install low-flush toilets, flow-optimised faucets and energy-efficient filters.

2. How Can You Ensure My New Plumbing System Complies With Local Building Codes?

The best way to ensure compliance with local plumbing codes is to seek help from an approved agency or professional. Likewise, you should get permission from the relevant local authorities before renovating.